Ford F-150 keys I make on-site
The Ford F-150 is the most popular truck around Winnipeg, and I make F-150 keys often. F-150 trucks from 2000 and newer use transponder or remote-head keys, and newer ones use push-to-start smart keys — I cut and program them where you are parked, with no towing. The one case to check first is a push-to-start F-150 with every key lost: send me the year and VIN and I tell you before I drive out whether I can do it on-site. A second key done at the same visit is half price.
- Lost all keys — a brand-new Ford F-150 key cut and programmed from scratch.
- Spare / duplicate keys — a backup before you are stuck.
- Key fob & remote programming — fobs and remotes set up to your Ford F-150.
- Chip & push-to-start keys — cut and programmed on the spot, depending on your year and trim.
The gear I bring to your car
My cutting and programming setup — the same gear I bring to your car.
Cutting a fresh key on my own machine
Professional key-cutting gear, brought to you
What to have ready at your car
Before any work, I always check your vehicle registration and a matching photo ID — a standard part of how I operate, to confirm the vehicle is yours.
From $200 for a Ford F-150 with no working key left · from $160 for a spare. Key fobs and remotes start from $160.
You always get the price up front and pay only once the key works. See my full pricing.
1-year warranty on my work · No call-out fee — you pay only for the result.
“I had a very good experience using the service. Everything went well and done as promised! I’m giving 5 stars.”
— Ariel Alhambra
Where I work
All of Winnipeg and the surrounding region — including Selkirk, Lockport, St. Andrews, West St. Paul, Headingley, Stony Mountain, Stonewall, Oakbank and Niverville. The drive is free inside Winnipeg; outside Winnipeg a distance-based travel fee is part of the all-in price I give you before I set out. Open 8 AM–9 PM, 7 days a week.
Ford F-150 keys by year
Every F-150 from 2000 and newer runs Ford’s PATS transponder immobilizer, so the key carries a chip that has to be programmed to the truck. Through roughly 2004–2014 the F-150 typically used a transponder or remote-head key (blade and remote buttons in one). From the 2015 (13th-generation) truck onward it splits by trim: work trims like XL and XLT usually take a bladed flip key, while Lariat, King Ranch and Platinum use Ford Intelligent Access proximity push-to-start smart keys — and that split carried into the 2021-and-newer trucks. Tell me your year and trim, or send the VIN, and I confirm exactly what your F-150 needs, then cut and program it on-site.
Ford F-150 key or fob not working? Common fixes
Every F-150 from 2000 on runs Ford’s PATS immobilizer, so the chip has to be programmed to the truck. Work trims usually take a bladed flip key; Lariat and up use Intelligent Access push-to-start.
- PATS immobilizer won’t let it start — The truck cranks but won’t run because PATS isn’t reading the chip. I program a chip key coded to your F-150.
- Intelligent Access fob won’t start the truck — A dying fob battery or a de-synced proximity fob stops a push-to-start F-150 detecting it — I replace or re-program it.
- Flip key blade worn or buttons dead — On XL/XLT flip keys a worn blade or failed remote is common — I cut and program a replacement.
- Lost all F-150 keys — For most years I generate and program a new key from scratch, on-site — no tow to the dealer. On a push-to-start F-150, send me the year and VIN first and I tell you before I drive out whether I can do it on-site.
Not sure which one it is? Send a photo of your Ford F-150 key on WhatsApp and I’ll tell you what you need. You pay only once it works.
Frequently asked questions
- Can you make a Ford F-150 key if I have lost all of them?
- For most years, yes. Even with no working key, I can generate and program a brand-new Ford F-150 key from scratch on-site, older ones included. On a push-to-start (Intelligent Access) F-150, send me the year and VIN first — I tell you before I drive out whether I can do it on-site.
- Do you program Ford F-150 key fobs and smart keys?
- Yes. I program Ford F-150 remotes, fobs, transponder (chip) keys and smart / push-to-start keys on-site, depending on your year and trim. Fobs and chip keys start from $160 and Intelligent Access smart keys from $170.
- How much is a Ford F-150 key in Winnipeg?
- A transponder or remote-head key for an older F-150, or a flip key for a 2015-and-newer XL or XLT, starts from $160; an Intelligent Access push-to-start key for a Lariat, King Ranch or Platinum from $170; all keys lost from $200, taxes included. A second key done at the same visit is half price, and you pay only once the key works.
- Does my F-150 take a flip key or a smart key?
- From the 2015 truck on, it depends on the trim more than the year: XL and XLT work trucks usually take a bladed flip key, while Lariat, King Ranch and Platinum use Intelligent Access push-to-start — a split that carried into the 2021-and-newer trucks. Every F-150 from 2000 on has a PATS chip in the key. Send the VIN and I confirm.
- I lost every key for my Ford — why do you program two?
- On many Fords the car will not finish programming with fewer than two keys once all originals are gone. It is how the security system works, not an add-on — so I quote all-keys-lost Ford jobs with two keys, and tell you the full price before I drive out.
Related
- Chevrolet Silverado keys in Winnipeg
- Ram 1500 keys in Winnipeg
- GMC Sierra keys in Winnipeg
- Ford Escape keys in Winnipeg
- Why every F-150 needs a spare key · Ford MyKey explained
- All Ford car keys in Winnipeg
- Lost car key replacement in Winnipeg
- Spare & duplicate car keys in Winnipeg
- Key fob & remote programming in Winnipeg
- Prices
Need a Ford F-150 key in Winnipeg?
Mobile auto locksmith — I come to you, 7 days a week.
Save my number to your phone — so it is there next time.